Shop

Showing 1–12 of 78 results

This Kit mounts to Bryant, Westinghouse, Thomas & Betts, and Sylvania electrical panels with the following features: Space between breaker columns: 1/2″ Two pole main breaker Two pole generator breaker located in spaces: 2 & 4 Main breaker toggle switch: Vertical (up & down) throw direction ON & OFF Main breaker sits centered over the breaker columns Main breaker sits inset into the panel cover Main breaker is ON in the UP position and OFF in the down position If your main breaker does not sit inset into the panel cover or if the throw direction if the opposite of what is shown here, please, call our office to inquire about modified Interlock Kits: (804)597-6356

Bryant / Thomas & Betts / Westinghouse Kit K-4410

$149.95 Add to cart
This Interlock Kit mounts to Cutler Hammer electrical panels and requires: CH-style breakers (tan handle) Vertical (up-down) throw One-handle breaker Centered over both breaker columns Inset in cover Distance from columns: 4-4 ½ ” (below) Space between breaker columns: ½”; three panel spaces required for this Kit

Cutler Hammer/EATON Kit K-6112

$149.95 Add to cart
This Interlock Kit mounts to EATON/Cutler Hammer electrical panels and requires: CH-style breakers (tan handle) Vertical (up-down) throw One-handle breaker Toggle switch is offset right of center if the main is at the top of the panel (if bottom fed the main toggle switch will be offset to the left of center) Inset in cover Distance from columns: 2¼” (above) *Take note of the main toggle switch – NOTICE THE FLIPPED MAIN BREAKER: ON is down and OFF is up* (the opposite would be true if this panel was bottom fed, ON up and OFF down) Space between breaker columns: ½”; three panel spaces required for this Kit

Cutler Hammer/EATON Kit K-6115

$149.95 Add to cart
This Kit performs like a manual transfer switch for Cutler Hammer/EATON electrical panels with the following features: Space between breaker columns: 1/2″ EATON 400 amp BR Meter Main Socket and Main Breaker Load Center Single Pole Main breaker Two Pole generator breaker, located in: spaces 2 & 4 (top two spaces in the right column) Main breaker toggle switch: Horizontal (left-right) throw direction ON & OFF Main breaker sits: offset left of center 1/2″ over the breaker columns Main breaker is ON to the RIGHT & OFF to the LEFT This kit can be modified to block out another 200 amp breaker located to the right of the existing 200 amp main. Please call our office: (804)597-6356 for information about modified Interlock Kits for your panel.

Cutler Hammer/EATON Kit K-6410

$249.95 Add to cart

General Electric Kit K-8610

$149.95 Add to cart
This Kit mounts to General Electric electrical panels with the following features: Space between breaker columns: 1 1/4″ Single pole main breaker Two pole generator breaker located in spaces: 2 & 4 (top two spaces in the right column) Main breaker toggle switch: Horizontal (left-right) throw direction ON & OFF Main breaker is ON in the LEFT position and OFF in the RIGHT position Main breaker sits offset to the left of the breaker columns This Interlock Kit is a modified version of Kit K-8610. See K-8610’s product page for comparison

General Electric Kit K-8615

$149.95 Add to cart
This Kit mounts to Siemens, ITE, Murray, Cutler Hammer, EATON, Crouse-Hinds, & Bryant electrical panels with the following features: Two-pole main breaker Main breaker toggle switch throws: Horizontally (left-right) throw ON & OFF K-4510 works in both the left or right column(s). Rotate Kit 180 degrees to install in the right column Compatible with single phase or three phase panels In-line with the column below. Typically a 1″ gap in the panel or a filler plate creates a gap between the main breaker & generator breaker Space between main breaker and generator breaker: 1″ (below)

Siemens / ITE / Murray / Cutler Hammer / EATON / Crouse-Hinds / Bryant Kit K-4510

$149.95 Add to cart
This Kit mounts to Siemens, ITE, and Murray electrical panels, with the following features: Space between breaker columns: 1/2″ PN or SN Series 100 AMP Main Breaker Plug on Neutral Load Center Two pole main breaker Two pole generator breaker, located in: spaces 2 & 4 (top two spaces in the right column) Main breaker toggle switch: Horizontal (left-right) throw direction ON & OFF Main breaker sits centered over the breaker columns Main breaker is ON to the left and OFF to the right This Interlock Kit is a modified version of Kit K-1510. See K-1510’s product page for comparison.

Siemens / ITE / Murray Kit K-1512

$149.95 Add to cart
This Kit mounts to Siemens, ITE, and Murray electrical panels with the following features: Space between breaker columns: 1/2″ Two pole main breaker Two pole generator breaker located in spaces: 2 & 4 Main breaker toggle switch: Vertical (up & down) throw direction ON & OFF Main breaker sits centered over the breaker columns Main breaker is ON in the UP position and OFF in the down position This Interlock Kit is a modified version of Kit K-4110. See K-4110’s product page for comparison

Siemens / ITE / Murray Kit K-4115

$149.95 Add to cart
30 Amp Convenience Inlet Box $85.00 The GE 30 Amp Power Inlet features a single enclosure that protects against weather and normal field use. Designed for use with a generator panel, a load center with an interlock kit, or a manual transfer switch for stand-by power. Door has a rolled edge for cord protection Door has a lockable feature It is rated NEMA 3R for outdoor use Features a NEMA L14-30 connection G90 galvanized steel construction with electro-deposition paint finish prevents corrosion

30 Amp Convenience Inlet Box

$85.00 Add to cart
30 Amp Generator Power Cord $49.95 – $149.95 Heavy-Duty 4-Prong Locking NEMA L14-30 Generator Power Extension Cord. It has a 4-Prong Locking 30 Amp 120/240-Volt L14-30P male plug and a L14-30R female connector. This cord has a maximum operating power of 30 Amp, 240-Volt, 7,500-Watt. Compatible with 30 Amp GE convenience inlet box sold under accessories tab.

30 Amp Generator Power Cord

$49.95 – $149.95 Select options
50 Amp Convenience Inlet Box $104.95 The GE 50 Amp Power Inlet (L14-50 Twist Lock) features a single enclosure that protects against weather and normal field use. Designed for use with a generator panel, a load center with an interlock kit, or a manual transfer switch for stand-by power. Door has a rolled edge for cord protection Door has a lockable feature It is rated NEMA 3R for outdoor use Features a CS6375 connection inside the Inlet Galvanized steel construction with electro-deposition paint finish prevents corrosion

50 Amp Convenience Inlet Box

$179.99 Add to cart